Details

---

BUY GBU10J https://www.utsource.net/itm/p/6496127.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Input Voltage	VIN	Continuous	35		400	V
Peak Current	IPEAK			1.5		A
Average Current	IAVG	@ 60Hz, 1 cycle		1.0		A
Power Dissipation	PD	@ TA = 25°C			1.8	W
Junction Temperature	TJ	Storage	-55		150	°C
Operating Temperature	TOPR	Continuous	-40		125	°C

Instructions for GBU10J

1. Mounting and Handling:

   • Ensure the device is mounted on a heatsink if operating at high current or power levels.
   • Handle with care to avoid damage to the leads.

2. Input Voltage:

   • Ensure the input voltage does not exceed the maximum rating of 400V to prevent damage to the device.

3. Current Ratings:

   • Do not exceed the peak current rating of 1.5A or the average current rating of 1.0A to avoid overheating and potential failure.

4. Power Dissipation:

   • Keep the power dissipation below 1.8W at an ambient temperature of 25°C. Use appropriate cooling methods if higher power dissipation is expected.

5. Temperature Considerations:

   • Operate within the specified junction temperature range (-55°C to 150°C) and ensure the operating temperature stays between -40°C and 125°C.

6. Storage:

   • Store in a dry environment away from direct sunlight and sources of heat.

7. Safety Precautions:

   • Always follow proper safety procedures when working with electrical components.
   • Avoid short circuits and ensure proper insulation to prevent electrical hazards.

(For reference only)