Details

---

BUY PCA82C251T/YM,112 https://www.utsource.net/itm/p/7251175.html
CAN 1MBd Standby 5V Automotive 8-Pin SO Bulk

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Supply Voltage	VCC	4.75	-	5.25	V	-
Output Current (Sink)	IO(sink)	-	100	-	mA	VCC = 5V, TA = 25°C
Output Current (Source)	IO(source)	-	40	-	mA	VCC = 5V, TA = 25°C
Differential Input Voltage	Vdiff	-	0	2	V	-
Common-Mode Input Voltage Range	VCM	0	-	VCC	V	-
Differential Output Voltage	VOD	0.9	-	1.2	V	IO = 40mA, VCC = 5V, TA = 25°C
Output Rise Time	tr	-	15	-	ns	VCC = 5V, CL = 100pF, VOD = 1.2V
Output Fall Time	tf	-	15	-	ns	VCC = 5V, CL = 100pF, VOD = 1.2V
Propagation Delay Time	tpd	-	35	-	ns	VCC = 5V, CL = 100pF, VOD = 1.2V
Operating Temperature Range	TOP	-40	-	125	°C	-
Storage Temperature Range	TSTG	-65	-	150	°C	-

Instructions for Use:

1. Supply Voltage:

   • Ensure the supply voltage is within the range of 4.75V to 5.25V to avoid damage to the device.

2. Output Current:

   • The device can sink up to 100mA and source up to 40mA. Do not exceed these limits to prevent overheating or damage.

3. Differential Input Voltage:

   • The differential input voltage should be between 0V and 2V. Exceeding this range can lead to incorrect operation.

4. Common-Mode Input Voltage Range:

   • The common-mode input voltage should be within the range of 0V to V_CC. Ensure that the input signals do not exceed these limits.

5. Differential Output Voltage:

   • The differential output voltage should be around 1.05V when the output current is 40mA. This value can vary slightly depending on the load and temperature.

6. Output Rise and Fall Times:

   • The rise and fall times are typically 15ns. These values can help in designing the timing requirements of your system.

7. Propagation Delay Time:

   • The propagation delay time is typically 35ns. This is important for ensuring proper signal timing in high-speed applications.

8. Operating and Storage Temperature:

   • The device can operate in temperatures ranging from -40°C to 125°C and can be stored in temperatures ranging from -65°C to 150°C. Ensure that the device is not exposed to temperatures outside these ranges for extended periods.

9. Handling:

   • Handle the device with care to avoid static discharge, which can damage the internal components. Use proper ESD protection when handling the device.

10. Mounting:

    • Follow standard surface mount technology (SMT) procedures for mounting the device on a PCB. Ensure that the solder joints are clean and free of voids to ensure reliable operation.

(For reference only)