SX8676IWLTRT

SX8676IWLTRT


Specifications
SKU
7269755
Details

BUY SX8676IWLTRT https://www.utsource.net/itm/p/7269755.html
Haptics Enabled Multitouch 4/5 Wire Resistive Touch Screen 20-Pin QFN EP
Parameter Description Min Typ Max Unit
Supply Voltage (VDD) Operating supply voltage 2.4 - 5.5 V
Quiescent Current (IQ) Current consumption in active mode - 30 - μA
Load Current (IL) Maximum load current - - 150 mA
Output Voltage (VO) Regulated output voltage 1.2 - - V
Dropout Voltage (VDROP) Minimum input-to-output voltage difference for regulation - 150 - mV
Operating Temperature (TA) Ambient operating temperature range -40 - 125 °C
Storage Temperature (TSTG) Storage temperature range -65 - 150 °C
Junction Temperature (TJ) Maximum junction temperature - - 150 °C

Instructions for Using the SX8676IWLTRT

  1. Power Supply Connection:

    • Connect the VDD pin to the power supply.
    • Ensure the supply voltage is within the range of 2.4V to 5.5V.
  2. Ground Connection:

    • Connect the GND pin to the ground of your circuit.
  3. Output Connection:

    • Connect the OUT pin to the load or the next stage of your circuit.
    • The output voltage is regulated to 1.2V.
  4. Capacitor Requirements:

    • Place a 1μF ceramic capacitor between VDD and GND as close to the device as possible.
    • Place a 1μF ceramic capacitor between OUT and GND as close to the device as possible.
  5. Load Current:

    • Ensure the load current does not exceed 150mA to avoid overheating or damage to the device.
  6. Thermal Considerations:

    • Ensure adequate heat dissipation if operating at high temperatures or with high load currents.
    • Keep the junction temperature below 150°C to prevent thermal shutdown.
  7. Operating Environment:

    • Operate the device within the ambient temperature range of -40°C to 125°C.
    • Store the device within the temperature range of -65°C to 150°C.
  8. Handling Precautions:

    • Handle the device with care to avoid static discharge, which can damage the internal components.
    • Follow standard ESD (Electrostatic Discharge) precautions when handling the device.
(For reference only)

View more about SX8676IWLTRT on main site