Details

---

BUY 6116SA15TPG https://www.utsource.net/itm/p/7576827.html
SRAM - Asynchronous Memory IC 16Kb (2K x 8) Parallel 15ns 24-PDIP

Parameter	Description	Value
Part Number	Device Identifier	6116SA15TPG
Type	Memory Type	SRAM (Static RAM)
Organization	Memory Organization	16K x 8 bits
Supply Voltage (Vcc)	Operating Voltage Range	4.5V to 5.5V
Operating Temperature	Temperature Range	-40°C to +85°C
Access Time (tAA)	Access Time	150 ns
Cycle Time (tCYC)	Cycle Time	200 ns
Data Retention	Data Retention Time at 85°C	20 years
Package	Package Type	24-Pin PDIP (Plastic Dual In-Line Package)
Pin Configuration	Pin Count	24
Power Consumption	Active Current	20 mA (typical)
Standby Current	Standby Current	10 μA (typical)
Write Enable (WE#)	Write Enable Input	Active Low
Output Enable (OE#)	Output Enable Input	Active Low
Chip Select (CE#)	Chip Select Input	Active Low
Address Lines	Number of Address Lines	14 (A0-A13)
Data Lines	Number of Data Lines	8 (D0-D7)

Instructions for Use:

1. Power Supply:

   • Connect Vcc to a stable 5V supply.
   • Connect Vss to ground.

2. Addressing:

   • Apply the desired address to the address lines (A0-A13).
   • Ensure that the address lines are stable before the access time (tAA).

3. Data Operations:

   • For Read Operations:
     • Set CE# low to enable the chip.
     • Set OE# low to enable data output.
     • The data will be available on the data lines (D0-D7) after the access time (tAA).
   • For Write Operations:
     • Set CE# low to enable the chip.
     • Set WE# low to enable writing.
     • Apply the data to the data lines (D0-D7).
     • Ensure that the data lines are stable before the access time (tAA).

4. Timing Considerations:

   • Ensure that all timing parameters (tAA, tCYC) are met to avoid data corruption or incorrect operations.
   • Refer to the datasheet for detailed timing diagrams and specifications.

5. Power Management:

   • To reduce power consumption, set CE# high when the device is not in use.
   • In standby mode, the device consumes minimal current (10 μA typical).

6. Handling Precautions:

   • Handle the device with care to avoid static damage.
   • Follow standard ESD (Electrostatic Discharge) precautions during handling and installation.

7. Storage:

   • Store the device in a dry, cool place to ensure long-term reliability.

(For reference only)