Details

---

BUY BTS442E2 E3043 https://www.utsource.net/itm/p/7626701.html
IC HIGH SIDE PWR SWITCH TO220-5

Parameter	Symbol	Min	Typ	Max	Unit	Condition
Continuous Drain Current	ID	-	150	-	A	Ta = 25°C
Peak Pulse Drain Current	Ipp	-	300	-	A	tpp = 10ms, Ta = 25°C
Drain-Source Voltage	VDS	-	45	-	V
Gate-Source Voltage	VGS	-18	-	18	V
RDS(on)	RDS(on)	-	2.8	-	mΩ	VGS = 10V, ID = 150A, Ta = 25°C
Total Power Dissipation	PTOT	-	270	-	W	Ta = 25°C
Junction Temperature	Tj	-	175	-	°C
Storage Temperature	Tstg	-40	-	150	°C

Instructions for Use:

1. Mounting and Heat Sinking:

   • Ensure proper heat sinking to maintain junction temperature within specified limits.
   • Use thermal paste or thermal interface material between the device and the heat sink for optimal thermal performance.

2. Electrical Connections:

   • Connect the drain (D), source (S), and gate (G) terminals correctly to avoid damage.
   • Use short, low-inductance leads for high-frequency applications.

3. Gate Drive:

   • Apply a gate-source voltage (VGS) within the specified range to ensure reliable operation.
   • Use a gate resistor to control the switching speed and reduce electromagnetic interference (EMI).

4. Overcurrent Protection:

   • Implement overcurrent protection to prevent damage from excessive current.
   • Monitor the drain current (ID) and limit it to the continuous drain current rating.

5. Thermal Management:

   • Regularly monitor the junction temperature (Tj) to ensure it does not exceed the maximum rating.
   • Consider forced air cooling or liquid cooling for high-power applications.

6. Storage and Handling:

   • Store the device in a dry, cool place to prevent moisture damage.
   • Handle the device with care to avoid mechanical stress or damage to the terminals.

7. Testing:

   • Perform initial testing at low power levels to verify correct operation.
   • Gradually increase the power level while monitoring temperature and performance parameters.

8. Compliance:

   • Ensure that the application complies with relevant safety and regulatory standards.
   • Refer to the datasheet for detailed specifications and additional information.

(For reference only)