Details

---

BUY TLP785 DIP4 https://www.utsource.net/itm/p/8640131.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Forward Voltage	V_F	IF = 20 mA	-	1.2	1.5	V
Reverse Breakdown Voltage	V_R	IR = 1 渭A	5	-	7	V
Forward Current	I_F	Continuous, Ta = 25掳C	-	30	50	mA
Peak Pulse Current	I_FM	t = 10 ms, Repetition Rate = 1 Hz	-	-	100	mA
Storage Temperature	T_STG		-40	-	85	掳C
Operating Temperature	T_OP		0	-	70	掳C

Instructions for TLP785 DIP4:

1. Handling and Storage:

   • Store the device in a dry environment to prevent moisture damage.
   • Handle with care to avoid static damage; use appropriate ESD precautions.

2. Mounting:

   • Ensure proper alignment of the pins during insertion into the PCB.
   • Avoid excessive force when inserting or removing the component from sockets or boards.

3. Soldering:

   • Use temperatures within the recommended range to prevent thermal damage.
   • Recommended soldering temperature is 260掳C for up to 10 seconds.

4. Electrical Connections:

   • Verify correct polarity before applying power.
   • Ensure that the forward current does not exceed the maximum rating to prevent overheating and potential failure.

5. Environmental Considerations:

   • Operate within the specified temperature ranges to ensure reliable performance.
   • Protect from exposure to corrosive environments which can degrade performance over time.

6. Testing:

   • Perform initial testing at room temperature to verify functionality.
   • Regularly inspect connections and mounting for signs of wear or damage.

(For reference only)