Details

---

BUY CD40110BE DIP-16 NEW AND ORIGINAL IC https://www.utsource.net/itm/p/8640257.html

Parameter	Description
Package Type	DIP-16 (Dual Inline Package)
Logic Family	CMOS
Supply Voltage (VDD)	3V to 15V
Operating Temperature	-40掳C to +85掳C
Input Current (II)	卤1 渭A (Typical at VDD = 5V, TA = 25掳C)
Output Current (IO)	卤10 mA (Maximum at VDD = 5V, TA = 25掳C)
Propagation Delay	70 ns (Typical at VDD = 5V, TA = 25掳C)
Power Dissipation	100 mW (Maximum at TA = 25掳C)
Storage Temperature	-65掳C to +150掳C

Instructions for Use:

1. Power Supply Connection: Connect the positive supply voltage (VDD) to pin 16 and the ground (GND) to pin 8. Ensure that the supply voltage is within the specified range of 3V to 15V.

2. Signal Input Handling: The CD40110BE has multiple input pins. Ensure that the input signals are within the logic levels defined by the supply voltage. Avoid applying voltages outside the VDD and GND levels directly to the inputs.

3. Output Load Consideration: When connecting loads to the output pins, ensure that the current drawn does not exceed the maximum output current capability of 卤10 mA per output.

4. Decoupling Capacitors: Place a decoupling capacitor (typically 0.1 渭F) close to the power supply pins (VDD and GND) to minimize noise and transient effects.

5. Handling Precautions: This IC is sensitive to electrostatic discharge (ESD). Handle with care and use proper ESD protection measures when soldering or handling the device.

6. Temperature Management: Operate the device within the specified temperature range to avoid thermal damage. If operating in high-temperature environments, consider heat dissipation mechanisms.

7. Reading the Pinout Diagram: Refer to the specific pinout diagram provided in the datasheet to correctly identify and connect each pin. Misconnections can lead to improper operation or damage to the IC.

For detailed specifications and advanced usage, refer to the official datasheet provided by the manufacturer.

(For reference only)