Details

---

BUY HIP4080AIPZ DIP-20 https://www.utsource.net/itm/p/8640516.html

Parameter	Description	Min	Typ	Max	Unit
Input Voltage (Vcc)	Operating voltage range	4.5	-	5.5	V
Output Current (Iout)	Maximum output current per channel	-	1.5	3.0	A
Channel-to-Channel Crosstalk	Isolation between channels	-	-	60	dB
Thermal Shutdown Temperature	Temperature at which thermal shutdown occurs	-	150	-	°C
Operating Temperature Range	Ambient temperature range for operation	-40	-	125	°C
Storage Temperature Range	Temperature range for storage	-65	-	150	°C
Quiescent Current (Iq)	Supply current when no load is present	10	-	20	mA
Rise Time (tr)	Time to rise from 10% to 90% of output voltage	-	200	-	ns
Fall Time (tf)	Time to fall from 90% to 10% of output voltage	-	200	-	ns
Propagation Delay (tpd)	Time delay from input to output transition	-	100	-	ns

Instructions for HIP4080AIPZ DIP-20

1. Power Supply:

   • Ensure the input voltage (Vcc) is within the specified range of 4.5V to 5.5V.
   • Use a stable power supply to avoid voltage fluctuations that can affect performance.

2. Output Current:

   • Do not exceed the maximum output current of 3.0A per channel to prevent damage to the device.
   • For optimal performance, keep the output current around 1.5A.

3. Thermal Management:

   • Place the device in a well-ventilated area to ensure proper heat dissipation.
   • Monitor the operating temperature to avoid exceeding 125°C, which can trigger thermal shutdown.

4. Installation:

   • Solder the device onto a PCB with appropriate thermal vias to enhance heat dissipation.
   • Ensure all connections are secure and free from shorts or open circuits.

5. Signal Integrity:

   • Use short and direct traces for signal lines to minimize noise and crosstalk.
   • Keep high-frequency signals away from sensitive analog sections to reduce interference.

6. Storage:

   • Store the device in a dry environment with temperatures ranging from -65°C to 150°C.
   • Avoid exposure to extreme humidity to prevent corrosion.

7. Testing:

   • Before final assembly, test the device under typical operating conditions to ensure it meets specifications.
   • Use a multimeter to check for continuity and correct voltage levels at key points.

8. Handling:

   • Handle the device with care to avoid mechanical stress or damage to the pins.
   • Use ESD (Electrostatic Discharge) protection measures to prevent static damage.

By following these instructions, you can ensure reliable and efficient operation of the HIP4080AIPZ DIP-20.

(For reference only)