Details

---

BUY MAX232ESE+T IC RS-232 DRVR/RCVR 16-SOIC MAXIM 2.5K/ROLL https://www.utsource.net/itm/p/8640646.html

Parameter	Description
Part Number	MAX232ESE+T
Function	RS-232 Driver/Receiver
Package Type	16-SOIC (Small Outline Integrated Circuit)
Manufacturer	Maxim Integrated
Supply Voltage	3V to 5.5V
Operating Temperature	-40°C to +85°C
Data Rate	Up to 120kbps
Capacitors Required	External capacitors for charge pump operation
Number of Drivers	2 drivers
Number of Receivers	2 receivers
ESD Protection	±15kV Human Body Model (HBM)
Order Quantity	2,500 per roll

Instructions:

1. Power Supply Connection: Connect the VCC pin to a power supply between 3V and 5.5V. Ground all GND pins.
2. External Capacitors: Install external capacitors as specified in the datasheet for the charge pump to function correctly. Typically, four 1μF capacitors are required.
3. Signal Connections: Connect the driver inputs (T1IN, T2IN) to TTL/CMOS logic-level signals and the receiver outputs (R1OUT, R2OUT) to TTL/CMOS logic-level circuits.
4. RS-232 Connections: Connect the driver outputs (T1OUT, T2OUT) and receiver inputs (R1IN, R2IN) to RS-232 compliant devices.
5. Heat Dissipation: Ensure adequate heat dissipation if operating at higher data rates or temperatures.
6. Handling Precautions: Handle with care to avoid ESD damage; the device has built-in protection but is not immune to excessive static discharge.

For detailed specifications and application notes, refer to the official Maxim Integrated datasheet for the MAX232ESE+T.

(For reference only)