Details

---

BUY ULN2001D DIP8 https://www.utsource.net/itm/p/8646936.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Continuous Collector Current	IC	Per collector	-	500	-	mA
Pulse Collector Current	ICP	Per collector, tP ≤ 1ms, Duty cycle ≤ 5%	-	600	-	mA
Collector-Emitter Voltage	VCEO		-	50	-	V
Emitter-Collector Voltage	VECEO		-	50	-	V
Base-Emitter Voltage	VBE	IC = 5mA	-	1.8	-	V
Storage Temperature Range	Tstg		-55	-	150	°C
Operating Temperature Range	Topr		0	-	70	°C

Instructions for ULN2001D DIP8

1. Handling Precautions:

   • The ULN2001D is sensitive to electrostatic discharge (ESD). Handle with care and use proper ESD precautions.

2. Mounting:

   • Ensure the correct orientation of the device during installation. Pin 1 is usually marked by a dot or notch on the package.
   • Use appropriate soldering techniques to avoid damage from excessive heat.

3. Power Supply:

   • The device can operate over a wide range of voltages but typically operates between 5V and 50V. Ensure the supply voltage does not exceed the maximum ratings.

4. Current Limitation:

   • Do not exceed the continuous or pulse current ratings. Exceeding these limits can cause permanent damage to the device.

5. Heat Dissipation:

   • For applications involving high current or extended operation, consider adding a heatsink to dissipate excess heat.

6. Testing:

   • Before finalizing the circuit design, test the device under typical operating conditions to ensure it meets performance requirements.

7. Storage:

   • Store in a dry, cool place away from direct sunlight and sources of heat. Follow the storage temperature guidelines provided.

8. Compliance:

   • Verify that the application complies with all relevant safety and regulatory standards.

This table and set of instructions provide essential information for using the ULN2001D DIP8 effectively and safely.

(For reference only)