Details

---

BUY H26M31001HPR https://www.utsource.net/itm/p/8647213.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VDD	Operating	1.7		3.6	V
Output Current	IOUT	Continuous		2.5	3	A
Switching Frequency	fSW		400		2000	kHz
Efficiency	畏	@ 1A, 3.3V output		88		%
Quiescent Current	IQ	@ VIN = 3.3V		90		渭A
Dropout Voltage	VDROPOUT	@ IOUT = 3A		250		mV
Load Transient Response		@ IOUT: 0A to 3A, 10渭s		卤50		mV
Line Transient Response		@ VIN: 2.5V to 3.6V, 1ms		卤30		mV
Operating Temperature	Toper		-40		85	掳C
Storage Temperature	Tstg		-65		150	掳C

Instructions for Use:

1. Power Supply Connection: Ensure the input voltage (VDD) is within the specified range of 1.7V to 3.6V. Connect the power supply to the input pins carefully.
2. Output Configuration: The device can provide a continuous output current up to 3A. Configure the output circuitry according to your load requirements.
3. Thermal Considerations: The operating temperature range is from -40掳C to 85掳C. Ensure adequate heat dissipation if operating near the maximum temperature.
4. Efficiency Optimization: For optimal efficiency, operate within the recommended conditions, especially around 1A with a 3.3V output.
5. Transient Handling: The device is designed to handle load and line transients within specified limits. Verify that transient conditions do not exceed 卤50mV for load and 卤30mV for line changes.
6. Storage Handling: When storing the device, ensure temperatures are between -65掳C and 150掳C to prevent damage.
7. Quiescent Current Awareness: At a typical input voltage of 3.3V, the quiescent current is approximately 90渭A. Factor this into overall power consumption calculations.
8. Dropout Voltage Management: Be aware of the dropout voltage, which is about 250mV at full load, to avoid insufficient voltage regulation.

(For reference only)