Details

---

BUY EXO3-16.000M https://www.utsource.net/itm/p/8647556.html
 

Parameter	Value
Part Number	EXO3-16.000M
Type	Crystal Oscillator
Frequency	16.000 MHz
Tolerance	±20 ppm
Stability	±50 ppm over -20°C to +70°C
Operating Temperature	-20°C to +70°C
Supply Voltage	3.3V
Current Consumption	8 mA (Typical)
Output Type	CMOS
Package	4-pin SMD
Dimensions	5.0 x 3.2 x 1.6 mm
Mounting	Surface Mount

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage is within the specified range (3.3V).
   • Use a stable power source to avoid fluctuations that can affect performance.

2. Circuit Connection:

   • Connect the oscillator to the microcontroller or other device according to the pinout diagram.
   • Pin 1: Vcc (3.3V)
   • Pin 2: Output
   • Pin 3: Ground (GND)
   • Pin 4: Not Connected (NC)

3. Decoupling Capacitors:

   • Place a 0.1 μF ceramic capacitor close to the Vcc and GND pins to filter out noise and ensure stable operation.

4. ** PCB Layout:**

   • Keep the oscillator and its associated components as close as possible to minimize trace lengths.
   • Use ground planes to reduce noise and improve signal integrity.

5. Handling:

   • Handle the oscillator with care to avoid mechanical stress, which can affect frequency stability.
   • Use proper ESD protection to prevent damage from static electricity.

6. Storage:

   • Store the oscillator in a dry, cool place to maintain its performance and longevity.

7. Testing:

   • Before final assembly, test the oscillator using a frequency counter to ensure it meets the required specifications.

8. Compliance:

   • Ensure that the oscillator complies with all relevant safety and regulatory standards for your application.

(For reference only)