Details

---

BUY HCPL-2530-500E https://www.utsource.net/itm/p/8647605.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Input Forward Voltage	V_F	1.2	1.5	1.8	V	Forward voltage at IF = 20 mA
Peak Reverse Voltage	V_R	-	5	-	V	Maximum peak reverse voltage
Input Current	I_F	-	20	-	mA	Forward current
Output Collector-Emitter Voltage	V_CE	-	70	-	V	Maximum collector-emitter voltage
Output Collector Current	I_C	-	1	-	A	Continuous output current
Isolation Voltage	V_I	-	5000	-	Vrms	Minimum isolation voltage
Propagation Delay Time	t_pl	4	6	8	渭s	Propagation delay time
Power Dissipation	P_D	-	125	-	mW	Total power dissipation
Operating Temperature	T_op	-40	-	85	掳C	Operating temperature range

Instructions for HCPL-2530-500E:

1. Installation and Handling:

   • Ensure the device is handled with care to avoid damage from static electricity or physical stress.
   • Follow standard surface mount technology (SMT) procedures for installation.

2. Power Supply:

   • Verify that the input and output voltages do not exceed the maximum ratings specified in the table.
   • Use appropriate decoupling capacitors near the power supply pins to minimize noise and voltage drops.

3. Input Signal:

   • Apply the forward current within the recommended range to ensure reliable operation of the input LED.
   • Ensure the signal frequency is compatible with the propagation delay characteristics of the device.

4. Output Load:

   • Connect the load to the output ensuring it does not exceed the maximum collector current and voltage ratings.
   • Consider heat dissipation if operating at high currents or in environments approaching the upper limit of the operating temperature range.

5. Isolation:

   • Respect the isolation voltage rating to maintain safety and performance.
   • Keep the primary and secondary circuits adequately separated to prevent interference and ensure proper isolation.

6. Testing:

   • Before full-scale production, conduct thorough testing under actual operating conditions to validate performance and reliability.
   • Monitor temperature and electrical parameters during testing to ensure they remain within safe limits.

7. Storage:

   • Store the devices in a dry, cool environment away from direct sunlight and corrosive substances.
   • Observe the storage time limitations provided by the manufacturer to ensure long-term reliability.

(For reference only)