Details

---

BUY FD2105M FD2105 40V HALF BRIDGE GATE DRIVE MSOP10 NEW ORIGINAL https://www.utsource.net/itm/p/8647733.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VDD	-	4.5	-	20	V
High-Side Driver Voltage	VGH	-	10	-	20	V
Low-Side Driver Voltage	VGL	-	0	-	5.5	V
Input High Level Voltage	VIH	-	2	-	VDD	V
Input Low Level Voltage	VIL	-	0	-	0.8	V
Output High-Level Voltage	VOH	IO = -1mA	VDD-0.4	-	VDD-0.1	V
Output Low-Level Voltage	VOL	IO = 1mA	0	-	0.4	V
Propagation Delay Time	tpd	VIN to OUT, VDD=12V	-	60	-	ns
Pulse Width Distortion	tPWD	VDD=12V	-	10	-	ns
Operating Temperature	Toper	-	-40	-	125	°C

Instructions for Use:

1. Power Supply Connection: Connect the supply voltage (VDD) within the specified range of 4.5V to 20V.
2. Driver Voltages: Ensure high-side driver voltage (VGH) is between 10V and 20V and low-side driver voltage (VGL) is between 0V and 5.5V.
3. Input Levels: Set input signals such that high levels are above 2V and low levels are below 0.8V relative to ground.
4. Output Levels: Monitor output levels; high should be close to VDD and low should not exceed 0.4V when sourcing current.
5. Timing Considerations: Account for a propagation delay of approximately 60ns and pulse width distortion around 10ns.
6. Temperature Range: Operate the device within the temperature range of -40°C to 125°C.
7. Handling Precautions: Follow standard precautions for handling static-sensitive components.

This table and instructions apply specifically to the FD2105M/FD2105 40V Half Bridge Gate Drive in MSOP10 package.

(For reference only)