Details

---

BUY BD001A5WEFJ-E2 https://www.utsource.net/itm/p/8647917.html

Parameter	Description	Value
Part Number	Full Part Number	BD001A5WEFJ-E2
Type	Type of Component	Bipolar Transistor
Package	Package Type	TO-220F
Polarity	Polarity	NPN
Collector-Emitter Voltage (Vce)	Maximum Collector-Emitter Voltage	50 V
Emitter-Base Voltage (Veb)	Maximum Emitter-Base Voltage	5 V
Collector Current (Ic)	Continuous Collector Current (DC)	1.5 A
Power Dissipation (Ptot)	Total Power Dissipation (at 25掳C)	65 W
Operating Temperature (Tamb)	Operating Ambient Temperature Range	-40掳C to +150掳C
Storage Temperature (Tstg)	Storage Temperature Range	-55掳C to +150掳C
hFE (DC Current Gain)	DC Current Gain (Min/Max)	100 / 300
Transition Frequency (ft)	Transition Frequency	10 MHz
Thermal Resistance (Rthjc)	Thermal Resistance (Junction to Case)	1.5 掳C/W
Mounting Type	Mounting Method	Through-Hole

Instructions for Use:

1. Handling Precautions:

   • Handle with care to avoid mechanical damage.
   • Avoid exposing the component to excessive heat, moisture, or corrosive environments.
   • Use appropriate ESD protection when handling the component.

2. Soldering:

   • Soldering temperature should not exceed 260掳C.
   • Soldering time should be kept to a minimum, typically no more than 3 seconds per terminal.
   • Allow the component to cool naturally after soldering.

3. Mounting:

   • Ensure that the component is securely mounted to the PCB.
   • Use a heat sink if necessary to manage thermal dissipation, especially under high power conditions.
   • Follow the recommended layout and mounting guidelines provided by the manufacturer.

4. Electrical Connections:

   • Connect the collector, base, and emitter terminals correctly according to the circuit diagram.
   • Ensure that the voltage and current ratings are not exceeded during operation.

5. Testing:

   • Test the component using a multimeter or a transistor tester to verify its functionality.
   • Check for any short circuits or open circuits before applying power to the circuit.

6. Storage:

   • Store the component in a dry, cool place away from direct sunlight.
   • Keep the component in its original packaging until ready for use to protect it from static and physical damage.

For detailed specifications and further information, refer to the datasheet provided by the manufacturer.

(For reference only)