Details

---

BUY HCPL-7601-000E https://www.utsource.net/itm/p/8647921.html

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Input Current (Forward)	IF	10	25	50	mA
Output Current	IO	0.1	1.5	5	mA
Isolation Voltage	VIORM			5000	Vrms	1 min
Propagation Delay Time	tPLH	10	15	20	渭s
	tPHL	10	15	20	渭s
Storage Temperature	Tstg	-40		85	掳C
Operating Temperature	Topr	-40		85	掳C
CTR (Current Transfer Ratio)	CTR	20	100	300	%	IF = 16mA

Instructions for HCPL-7601-000E

1. Power Supply and Grounding:

   • Ensure that the power supply and ground connections are correctly wired to avoid damage to the device.

2. Input and Output Connections:

   • Connect the input side of the optocoupler to the driving circuit ensuring the current is within the specified range.
   • Connect the output side to the load or receiving circuit, keeping in mind the maximum output current ratings.

3. Heat Management:

   • Place the device in an area with adequate ventilation or use a heat sink if operating at high currents or temperatures to prevent overheating.

4. Electrical Isolation:

   • The HCPL-7601 provides electrical isolation; ensure that the insulation requirements of your application do not exceed the rated isolation voltage.

5. Handling Precautions:

   • Handle the device carefully to avoid static discharge which can damage sensitive components.
   • Follow anti-static precautions when installing or handling the component.

6. Storage and Operation Temperatures:

   • Store the device within the recommended storage temperature range to maintain its integrity.
   • Operate the device within the specified operating temperature range to ensure reliable performance.

7. Propagation Delay:

   • Account for the propagation delay times in your timing circuits to ensure accurate signal transmission.

8. Current Transfer Ratio (CTR):

   • Verify the CTR meets your circuit requirements as it can vary based on the forward current applied to the input LED.

(For reference only)