Details

---

BUY 30GWJ2C https://www.utsource.net/itm/p/8648148.html

Parameter	Description	Value
Part Number	Full part number	30GWJ2C
Type	Type of component	Relay
Coil Voltage	Operating voltage for the coil	24VDC
Coil Power	Power consumption of the coil	1.2W
Contact Form	Configuration of the contacts	SPDT (1C/O)
Contact Rating	Maximum current and voltage for contacts	10A, 250VAC
Insulation Resistance	Minimum resistance between contacts and coil	100M惟 at 500VDC
Dielectric Strength	Voltage withstand capability	1500VAC for 1 minute
Operating Temperature	Range of ambient temperature	-40掳C to +85掳C
Storage Temperature	Range of storage temperature	-40掳C to +125掳C
Mechanical Life	Number of operations without load	10,000 cycles
Electrical Life	Number of operations with rated load	1,000,000 cycles
Dimensions	Physical size of the relay	17.5mm x 12.5mm x 12.5mm
Weight	Weight of the relay	10g
Mounting	Method of mounting	PCB mount
Terminal Type	Type of terminals	Solder lugs

Instructions:

1. Installation:

   • Ensure the relay is installed in a location that meets the operating temperature range.
   • Mount the relay on a printed circuit board (PCB) using the solder lugs.
   • Avoid mechanical stress on the terminals during installation.

2. Coil Connection:

   • Connect the coil terminals to the appropriate power supply (24VDC).
   • Ensure the polarity is correct if the relay is polarity-sensitive.

3. Contact Connection:

   • Connect the load to the normally open (NO) and common (COM) terminals for operation.
   • Connect the load to the normally closed (NC) and common (COM) terminals for de-energized state.

4. Operation:

   • When the coil is energized, the contacts will switch from NC to NO.
   • When the coil is de-energized, the contacts will return to their default position (NC).

5. Maintenance:

   • Regularly inspect the relay for signs of wear or damage.
   • Ensure the relay is not exposed to excessive humidity, dust, or corrosive environments.

6. Safety:

   • Do not exceed the maximum contact ratings.
   • Ensure proper insulation and grounding to prevent electrical shock.
   • Follow all relevant safety standards and regulations.

7. Disposal:

   • Dispose of the relay in accordance with local environmental regulations.

(For reference only)