Details

---

BUY TB6600HG TOSHIBA HZIP25 https://www.utsource.net/itm/p/8648258.html

Parameter	Description	Value
Product Name	Stepper Motor Driver IC	TB6600HG
Manufacturer	Toshiba
Package Type	HZIP25
Supply Voltage (VCC)	Operating voltage range for the driver	8V to 42V
Output Current	Continuous output current per phase	3.5A (with heatsink)
Microstep Resolution	Minimum step resolution supported	1/32
Control Interface	Input control signals	STEP, DIR, ENABLE
Protection Features	Built-in protection features	Overcurrent, Thermal Shutdown, Undervoltage Lockout
Operating Temperature	Temperature range for operation	-40°C to +85°C

Instructions:

1. Power Supply Connection: Connect the power supply within the specified voltage range (8V to 42V). Ensure a stable and clean power source to avoid instability or damage.
2. Motor Connection: Connect the stepper motor phases (A, A/, B, B/) to the respective terminals on the TB6600HG.
3. Control Signals:
   • STEP: Pulse input to command steps. Each pulse moves the motor one step.
   • DIR: Direction control. High or Low sets the direction of rotation.
   • ENABLE: Active low signal to enable or disable the driver.
4. Heat Management: For continuous high-current operation, ensure adequate heat dissipation using a heatsink.
5. Microstepping Configuration: Set microstepping mode via logic inputs or jumpers depending on the module design.
6. Safety Considerations: Monitor the temperature and current levels to prevent overheating or overcurrent conditions which can trigger protective shutdowns.

For detailed application circuits and advanced configurations, refer to the datasheet provided by Toshiba.

(For reference only)