Details

---

BUY 475K100CB4G/475K100V https://www.utsource.net/itm/p/8656983.html

Parameter	Description	Value
Part Number	Component Identifier	475K100CB4G/475K100V
Type	Component Type	Capacitor
Capacitance	Nominal Capacitance	100 μF
Voltage Rating	Maximum DC Voltage	475 VDC
Tolerance	Capacitance Tolerance	±10%
Temperature Coefficient	Change in Capacitance with Temperature	X7R (±15% from -55°C to +125°C)
Operating Temperature Range	Temperature Range for Operation	-55°C to +125°C
Ripple Current	Maximum RMS Ripple Current at 120 Hz	300 mA
Insulation Resistance	Minimum Insulation Resistance at 25°C	1000 MΩ
Dissipation Factor	Maximum Dissipation Factor at 1 kHz	2.0%
Case Size	Physical Dimensions	18 mm x 25 mm (Diameter x Height)
Terminal Type	Connection Method	Radial Leads
Compliance	Regulatory Standards	RoHS Compliant
Mounting Style	Installation Method	Through-Hole

Instructions:

1. Mounting: Ensure that the capacitor is mounted securely on the PCB with the leads bent at a 90-degree angle to provide mechanical stability.
2. Polarity Check: This capacitor is non-polarized, so there is no need to observe polarity during installation.
3. Voltage Handling: Do not exceed the maximum DC voltage rating of 475 VDC to avoid damage to the capacitor.
4. Temperature Management: Operate the capacitor within the specified temperature range (-55°C to +125°C) to ensure reliable performance.
5. Ripple Current: Ensure that the ripple current does not exceed 300 mA RMS at 120 Hz to prevent overheating.
6. Inspection: After mounting, inspect the capacitor for any physical damage or loose connections.
7. Storage: Store the capacitors in a dry environment away from direct sunlight and extreme temperatures.
8. Soldering: Use a soldering iron with a temperature not exceeding 350°C and complete the soldering process within 5 seconds to avoid thermal stress.
9. Environmental Compliance: Dispose of the capacitor according to local environmental regulations.

(For reference only)