Details

---

BUY HCPL-4200-500E https://www.utsource.net/itm/p/8657003.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Input Forward Voltage	V_F	IF = 20 mA		1.2	1.6	V
Reverse Breakdown Voltage	V_R	IR = 5 渭A			5	V
CTR (Current Transfer Ratio)	CTR	IF = 5 mA, V_CE = 5V	50	100		%
Output Collector-Emitter Saturation Voltage	V_CE(sat)	IC = 10 mA, IF = 5 mA			0.5	V
Output Collector Current	I_C	V_CE = 5V, IF = 5 mA		10	15	mA
Power Dissipation	P_D	Ta = 70掳C			150	mW
Operating Temperature Range	T_op		-40		85	掳C
Storage Temperature Range	T_stg		-55		125	掳C

Instructions for HCPL-4200-500E

1. Handling and Storage:

   • Store the device in a dry environment within the specified storage temperature range (-55掳C to 125掳C).
   • Handle with care to avoid mechanical damage.

2. Installation:

   • Ensure that the operating temperature remains within the specified range (-40掳C to 85掳C) during operation.
   • Mount the device on a PCB using standard surface mount technology (SMT).

3. Electrical Connections:

   • Connect the input side to the signal source ensuring the forward current (IF) does not exceed 20 mA to prevent damage.
   • Ensure the output collector-emitter voltage (V_CE) does not exceed 5V when the output is active.

4. Power Management:

   • Keep the power dissipation below 150 mW to ensure reliable operation and longevity of the device.

5. Testing and Verification:

   • Verify the current transfer ratio (CTR) during initial testing to ensure it falls within the typical range of 50% to 100%.

6. Safety Precautions:

   • Avoid exceeding the reverse breakdown voltage (V_R) of 5V to prevent potential damage to the device.
   • Ensure proper grounding and shielding to minimize noise interference.

7. Troubleshooting:

   • If the output does not respond as expected, check the input forward voltage and current levels.
   • Ensure all connections are secure and free from shorts or open circuits.

(For reference only)