Details

---

BUY HCPL-3120V-500E https://www.utsource.net/itm/p/8657009.html

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Input Forward Voltage	VF	-	1.2	1.6	V	IF = 20 mA, TA = 25掳C
Peak Reverse Voltage	VR	-	-	5	V
Continuous Reverse Current	IR	-	-	10	渭A	VR = 5 V, TA = 25掳C
Output Collector-Emitter Voltage	V<subCEO	-	-	70	V	IC = 0.1 mA, TA = 25掳C
Output Collector Current	IC	-	-	100	mA	VCEO = 70 V, TA = 25掳C
Isolation Voltage	VIORM	-	-	500	V	1 minute, 50/60 Hz
CTR (Current Transfer Ratio)	CTR	100	200	400	%	IF = 5 mA, IC = 5 mA, TA = 25掳C
Propagation Delay Time	tPLH, tPHL	-	2.5	4.5	渭s	IF = 20 mA, IC = 10 mA, TA = 25掳C
Storage Temperature Range	TSTG	-40	-	125	掳C
Operating Temperature Range	TA	-40	-	105	掳C

Instructions for Use:

1. Power Supply:

   • Ensure that the input forward voltage (V_F) is within the specified range to avoid damage to the device.
   • The output collector-emitter voltage (V<subCEO) should not exceed 70 V to prevent breakdown.

2. Current Handling:

   • The input forward current (I_F) should be set to 20 mA for optimal performance.
   • The output collector current (I_C) should not exceed 100 mA to ensure reliable operation.

3. Isolation:

   • The isolation voltage (VIORM) is rated at 500 V. Ensure that the device is used in circuits where this isolation is necessary to protect against high voltages.

4. Temperature Considerations:

   • The device can operate over a wide temperature range from -40掳C to 105掳C. However, for best performance, keep the operating temperature within this range.
   • Store the device in an environment with temperatures between -40掳C and 125掳C.

5. Timing Parameters:

   • The propagation delay time (t_PLH, t_PHL) is crucial for timing-sensitive applications. Ensure that the delay times are within the specified range to avoid timing issues.

6. Mounting and Handling:

   • Handle the device with care to avoid mechanical stress.
   • Follow proper soldering techniques to ensure reliable connections and prevent thermal damage.

7. Testing:

   • Before using the device in a final application, test it under the expected operating conditions to verify performance and reliability.

8. Compliance:

   • Ensure that the device meets all relevant safety and compliance standards for your specific application.

(For reference only)