Details

---

BUY KBPC1010 10A 1000V https://www.utsource.net/itm/p/8661695.html

Parameter	Value	Unit
Forward Voltage Drop (Vf)	1.1	V
Reverse Recovery Time (trr)	50	ns
Maximum Repetitive Peak Reverse Voltage (VRRM)	1000	V
Maximum RMS Voltage (VRMS)	707	V
Maximum Average Rectified Output Current (IOAV)	10	A
Peak Surge Current (IFSM)	200	A
Operating Junction Temperature (TJ)	-55 to +150	°C
Storage Temperature (TSTG)	-55 to +150	°C

Instructions for Use:

1. Mounting: Ensure the KBPC1010 is securely mounted on a heatsink if operating near maximum current ratings to maintain optimal performance and longevity.
2. Wiring: Connect the device ensuring correct polarity. The cathode (K) should be connected to the more positive side of the circuit, and the anode (A) to the more negative side.
3. Overvoltage Protection: Incorporate overvoltage protection circuits if your application involves high voltage transients to prevent damage to the rectifier.
4. Cooling: Adequate ventilation or cooling methods are recommended when operating at higher currents to avoid overheating.
5. Inspection: Regularly inspect the installation and connections for signs of wear or damage to ensure reliable operation.
6. Storage: Store in a dry environment within the specified storage temperature range to prevent degradation of properties.

Safety Precautions:

• Do not exceed the maximum ratings listed in the parameter table.
• Always use appropriate personal protective equipment when handling high voltage components.
• Ensure proper grounding of all equipment to avoid electrical hazards.

(For reference only)