Details

---

BUY ACPL-W611V https://www.utsource.net/itm/p/8663165.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Input Voltage	VIN	3.0	5.0	5.5	V	Supply voltage range
Output Voltage	VOUT	-	5.0	5.5	V	Regulated output voltage
Output Current	IOUT	-	100	200	mA	Continuous output current
Isolation Voltage	VIORM	-	-	5000	V	Reinforced insulation
Propagation Delay Time	tPD	1.0	1.5	2.0	渭s	Propagation delay time
Common Mode Transient Immunity	CMTI	-	25	50	kV/渭s	Common mode transient immunity
Operating Temperature	TOPR	-40	-	85	掳C	Operating temperature range
Storage Temperature	TSTG	-55	-	125	掳C	Storage temperature range

Instructions for ACPL-W611V

1. Power Supply Connection:

   • Connect the input voltage (VIN) within the specified range of 3.0V to 5.5V.
   • Ensure the output voltage (VOUT) is connected to the load requiring a regulated voltage.

2. Handling and Installation:

   • Handle with care to avoid damage to the isolation barrier.
   • Mount on a PCB with adequate spacing to ensure proper heat dissipation.

3. Electrical Safety:

   • Observe all safety precautions when working with high voltages across the isolation barrier.
   • Do not exceed the maximum isolation voltage (VIORM).

4. Operating Conditions:

   • Operate within the specified temperature ranges to ensure reliable performance.
   • Avoid subjecting the device to rapid temperature changes or extreme environmental conditions.

5. Testing:

   • Test the device under controlled conditions to verify its performance parameters.
   • Use appropriate test equipment that can accurately measure propagation delay and common mode transient immunity.

6. Storage:

   • Store in a dry, cool place away from direct sunlight and corrosive substances.
   • Follow recommended storage temperature limits to prevent degradation.

7. Compliance:

   • Ensure compliance with relevant standards and regulations for reinforced insulation devices.

(For reference only)