Details

---

BUY SN74HC32N DIP14 https://www.utsource.net/itm/p/8663612.html

Parameter	Description	Value
Package Type	Package style	DIP-14
Supply Voltage (VCC)	Operating supply voltage range	2 V to 6 V
Input Voltage (VIN)	Maximum input voltage	VCC + 0.5 V
Output Current (IOL)	Output current (low level)	25 mA
Propagation Delay	Typical propagation delay time	10 ns at VCC = 5 V
Operating Temperature	Operating temperature range	-40掳C to 85掳C
Storage Temperature	Storage temperature range	-65掳C to 150掳C
Power Dissipation	Total power dissipation	360 mW
Function	Logic function	Quad OR gate

Instructions for Use:

1. Pin Configuration: Ensure the correct orientation of the SN74HC32N in the circuit board. Pin 7 is typically connected to GND and pin 14 to VCC.
2. Power Supply: Connect the supply voltage (VCC) within the specified range (2 V to 6 V). Exceeding this range can damage the device.
3. Input Handling: Apply input voltages within the specified limits relative to VCC. Avoid applying voltages higher than VCC + 0.5 V.
4. Output Load: The output can sink up to 25 mA. Ensure that the load does not exceed this limit to prevent damage.
5. Temperature Considerations: Operate the device within the specified temperature range to ensure reliable performance. Avoid exposing the device to temperatures outside the storage range.
6. Decoupling Capacitors: Place decoupling capacitors close to the power pins (VCC and GND) to minimize noise and transient effects.
7. Handling Precautions: Handle with care to avoid electrostatic discharge (ESD) damage. Use appropriate ESD protection measures when handling the component.

(For reference only)