Details

---

BUY SKM200GB101D https://www.utsource.net/itm/p/8798798.html

Parameter	Description	Value
Device Name	IGBT Module	SKM200GB101D
Manufacturer	Infineon Technologies AG
Type	IGBT Module
Package Type	PressFIT, 6-Pin, ISOMOUNT?
Current - Collector to Emitter (Ic)	Continuous Collector Current @ Tc = 25°C	200 A
Voltage - Collector-Emitter (Vceo)	Collector-Emitter Voltage	1200 V
Power Dissipation (Ptot)	Total Power Loss @ Tc = 25°C	430 W
Thermal Resistance (Rth,j-c)	Junction to Case Thermal Resistance	0.18 K/W
Switching Frequency	Recommended Maximum Switching Frequency	10 kHz
Operating Temperature (Tj)	Junction Operating Temperature Range	-40°C to 150°C
Storage Temperature (Tstg)	Storage Temperature Range	-55°C to 150°C

Instructions for Use:

1. Installation:

   • Ensure the mounting surface is clean and flat.
   • Apply thermal paste if necessary between the module and heatsink for optimal heat dissipation.
   • Tighten the screws evenly to avoid warping.

2. Electrical Connections:

   • Connect the collector, emitter, and gate terminals according to the circuit diagram.
   • Verify all connections are secure to prevent arcing or short circuits.

3. Cooling Requirements:

   • Use an adequate heatsink or cooling system to maintain junction temperature within specified limits.
   • Monitor temperature during operation to ensure it does not exceed the maximum operating temperature.

4. Operation:

   • Operate within the specified current and voltage limits.
   • Avoid rapid changes in current to prevent thermal stress on the device.

5. Safety Precautions:

   • Handle with care to avoid damaging the press-fit pins.
   • Use appropriate safety equipment when working with high voltages.

6. Maintenance:

   • Regularly inspect connections and cooling systems.
   • Replace any damaged components immediately to prevent further issues.

(For reference only)