Details

---

BUY K200A02 https://www.utsource.net/itm/p/8799341.html

Parameter	Description	Value
Part Number	Full part identification	K200A02
Type	Type of component	Relay
Coil Voltage	Operating voltage for the coil	24VDC
Coil Current	Current required by the coil	40mA
Contact Form	Configuration of relay contacts	SPDT
Contact Rating	Maximum current and voltage the contacts can handle	10A, 250VAC
Insulation Voltage	Dielectric strength between contacts and coil	2500VAC
Operating Temperature	Range of temperatures for operation	-40°C to 85°C
Dimensions	Physical size of the component	17.5 x 12.2 x 13.7 mm
Weight	Weight of the component	6g

Instructions:

1. Installation:

   • Ensure the relay is mounted in a location that does not exceed its operating temperature range.
   • Connect the coil terminals to the appropriate control circuit supplying the specified coil voltage.

2. Wiring:

   • Wire the common (COM) terminal of the relay to the load or circuit being controlled.
   • Use the normally open (NO) and normally closed (NC) terminals as per the switching requirement.

3. Handling:

   • Handle with care to avoid damage to the sensitive components inside.
   • Avoid exposure to moisture and corrosive environments.

4. Testing:

   • Before installation, test the relay using a multimeter to ensure proper operation.
   • Verify the continuity between the COM and NC/NO contacts when the relay is energized and de-energized.

5. Maintenance:

   • Periodically inspect connections for corrosion or loose wires.
   • Replace the relay if there are signs of malfunction or physical damage.

(For reference only)