Details

---

BUY SKIIP22NAB12I https://www.utsource.net/itm/p/8799442.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Blocking Voltage	V(BR)DSS	-	1200	-	V	Maximum repetitive peak off-state drain-to-source voltage
Continuous Drain Current	ID	-	-	22	A	Continuous drain current at Tc = 25°C
Pulse Drain Current	ICM	-	88	-	A	Non-repetitive peak pulse drain current (Tc = 25°C, tp = 10 μs)
Total Gate Charge	Qg	-	63	-	nC	Total gate charge at VGS = ±15V
Input Capacitance	Ciss	-	4700	-	pF	Zero-bias input capacitance
Output Capacitance	Coss	-	950	-	pF	Zero-bias output capacitance
Reverse Transfer Capacitance	Crss	-	1050	-	pF	Zero-bias reverse transfer capacitance
On-State Resistance	RDS(on)	-	0.075	-	Ω	On-state resistance at VGS = 15V, ID = 10A
Threshold Voltage	VGS(th)	2.5	4.5	6.5	V	Gate threshold voltage

Instructions for SKIIP22NAB12I:

1. Installation:

   • Ensure the device is handled with care to avoid damage from electrostatic discharge (ESD).
   • Mount the component on a heatsink if continuous operation near maximum ratings is expected.

2. Operating Conditions:

   • Do not exceed the maximum ratings listed in the table.
   • Ensure adequate cooling to maintain junction temperature within specified limits.

3. Gate Drive Requirements:

   • Use a gate driver capable of supplying sufficient current to charge and discharge the gate capacitance quickly.
   • Apply gate voltages within the recommended range to ensure reliable switching performance.

4. Storage and Handling:

   • Store in a dry environment to prevent moisture ingress.
   • Handle with anti-static precautions to protect against ESD damage.

5. Testing:

   • Perform initial testing under controlled conditions to verify proper operation.
   • Monitor temperature and electrical parameters during testing to ensure safe operation.

6. Safety Precautions:

   • Always use appropriate personal protective equipment (PPE) when handling high-voltage or high-current circuits.
   • Follow all relevant safety guidelines and regulations when designing circuits with this component.

(For reference only)