Details

---

BUY MII400-12E4 https://www.utsource.net/itm/p/8809951.html

Parameter	Description	Value
Part Number	Product identifier	MII400-12E4
Type	Type of device	Isolated DC-DC Converter
Input Voltage Range	Range of input voltage the device can operate on	36V to 75V
Output Voltage	Nominal output voltage	12V
Output Power	Maximum power output	400W
Efficiency	Efficiency at nominal load	Up to 94%
Isolation Voltage	Maximum isolation voltage between input and output	1500VDC
Operating Temperature	Temperature range for operation	-40°C to +85°C
Storage Temperature	Temperature range for storage	-55°C to +125°C
Humidity	Operating humidity range	0% to 95% RH (non-condensing)
Dimensions	Physical size of the device	2.44" x 4.65" x 0.51" (62mm x 118mm x 13mm)
Weight	Weight of the device	0.25 lbs (113g)
Certifications	Regulatory and safety certifications	CE, UL, EN 50178

Instructions

1. Installation:

   • Ensure the input voltage is within the specified range (36V to 75V).
   • Connect the input terminals to the power source.
   • Connect the output terminals to the load.

2. Operation:

   • Turn on the power source.
   • Monitor the output voltage and current to ensure they are within the specified limits.
   • If the device is used in a high-temperature environment, ensure adequate ventilation to prevent overheating.

3. Maintenance:

   • Regularly inspect the connections for signs of wear or damage.
   • Clean the device with a dry cloth to remove dust and debris.
   • Do not use solvents or abrasive materials that could damage the device.

4. Troubleshooting:

   • No Output Voltage: Check the input voltage and connections. Ensure the power source is functioning correctly.
   • Overheating: Verify that the device has proper ventilation and is not operating beyond its temperature limits.
   • Output Voltage Fluctuations: Check for stable input voltage and ensure the load is within the rated output power.

5. Storage:

   • Store the device in a dry, cool place away from direct sunlight and sources of heat.
   • Avoid storing the device in environments with high humidity to prevent corrosion.

6. Safety Precautions:

   • Always disconnect the power source before performing any maintenance or inspection.
   • Use appropriate personal protective equipment (PPE) when handling the device.
   • Follow all local regulations and guidelines for electrical safety.

(For reference only)