Details

---

BUY F30UA60S https://www.utsource.net/itm/p/8853210.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Input Voltage	VIN	2.7	-	5.5	V	Operating input voltage range
Output Voltage	VOUT	-	3.3	-	V	Regulated output voltage
Quiescent Current	IQ	-	1.0	-	μA	Supply current in regulation
Shutdown Current	ISD	-	0.1	-	μA	Supply current in shutdown mode
Dropout Voltage	VDROPOUT	-	0.3	-	V	Dropout voltage at rated load
Load Regulation	-	-	1.0	-	%	Change in output voltage over load
Line Regulation	-	-	0.5	-	%	Change in output voltage over line
Operating Temperature	TOPR	-40	-	85	°C	Operating temperature range

Instructions for F30UA60S

1. Power Supply Connection:

   • Connect the input voltage (VIN) to the power supply ensuring it is within the specified range of 2.7V to 5.5V.
   • Ensure proper bypass capacitors are placed close to the input and output pins for stability.

2. Output Configuration:

   • The device provides a fixed output voltage of 3.3V. No external components are required for setting this voltage.

3. Shutdown Mode:

   • To enter shutdown mode, pull the enable pin low. This reduces the supply current to approximately 0.1μA.

4. Thermal Considerations:

   • Ensure adequate heat dissipation if operating at high temperatures or under heavy loads. Refer to thermal data for specific guidelines.

5. Capacitor Selection:

   • Use ceramic capacitors with X7R dielectric for best performance. Typical values are 1μF on the input and 1μF on the output.

6. PCB Layout Recommendations:

   • Keep the layout compact with short traces between the regulator and the bypass capacitors.
   • Place the input capacitor as close as possible to the VIN and GND pins.
   • Similarly, place the output capacitor close to the VOUT and GND pins.

7. Handling Precautions:

   • Handle the device with care to avoid damage from electrostatic discharge (ESD). Follow standard ESD handling procedures.

(For reference only)