Details

---

BUY FPAL20SM60 https://www.utsource.net/itm/p/8853241.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Input Voltage	VIN	2.7		5.5	V	Operating input voltage range
Output Voltage	VOUT		3.3		V	Regulated output voltage
Quiescent Current	IQ		1.0		μA	Supply current in shutdown mode
Load Current	ILOAD		60		mA	Maximum continuous output current
Dropout Voltage	VDROPOUT		200		mV	Typical dropout voltage at max load
PSRR (1 kHz)			60		dB	Power supply rejection ratio
Line Regulation			0.02		%/V	Line regulation over input voltage
Load Regulation			0.05		%/mA	Load regulation over output current
Operating Temperature	Toper	-40		85	°C	Operating temperature range

Instructions:

1. Powering the Device: Connect the input voltage (VIN) within the specified range of 2.7V to 5.5V. Ensure stable power supply to avoid damage or malfunction.
2. Output Configuration: The device provides a fixed output voltage of 3.3V. No external components are required for this configuration.
3. Thermal Considerations: Operate the device within the temperature range of -40°C to 85°C. Ensure adequate heat dissipation if operating near maximum load and temperature limits.
4. Load Handling: The device can handle up to 60mA continuously. For higher currents, consider additional cooling or a more capable regulator.
5. Efficiency and Dropout: With a typical dropout voltage of 200mV, ensure that the input voltage is sufficiently higher than the output voltage, especially under heavy load conditions.
6. Noise Reduction: The PSRR of 60dB at 1kHz helps in reducing noise from the input supply. Use appropriate capacitors on both input and output for optimal performance.
7. Quiescent Current: In shutdown mode, the quiescent current drops to approximately 1μA, aiding in low-power applications.
8. Regulation: The line and load regulation figures indicate the stability of the output voltage with changes in input voltage and load, respectively. These values should be considered for system design.

(For reference only)