Details

---

BUY HT5501 https://www.utsource.net/itm/p/8853625.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VDD		2.0	3.3	5.5	V
Operating Current	IOP	VDD = 3.3V	-	1.0	2.0	mA
Standby Current	ISB		-	0.1	0.5	μA
Output Frequency	fOUT	VDD = 3.3V, T=25°C	30	50	70	kHz
Temperature Range	Toper		-40	-	85	°C

Instructions for HT5501:

1. Power Supply Connection:

   • Connect the VDD pin to a power supply within the range of 2.0V to 5.5V.
   • Ensure that the GND pin is properly grounded.

2. Operating Mode Selection:

   • The device has both operating and standby modes. Use the MODE pin to select between these modes. For operating mode, set MODE high; for standby mode, set MODE low.

3. Output Configuration:

   • The output frequency can be adjusted by configuring external components or control pins as specified in the datasheet.
   • Ensure that any load connected to the output does not exceed the maximum current rating.

4. Temperature Considerations:

   • The device is designed to operate within a temperature range from -40°C to 85°C. Ensure that environmental conditions do not exceed this range to prevent damage or malfunction.

5. Handling Precautions:

   • The HT5501 is sensitive to electrostatic discharge (ESD). Handle with care and follow proper ESD protection practices during installation and handling.

6. Application Notes:

   • Refer to the application notes section of the datasheet for detailed guidance on specific applications and troubleshooting tips.

(For reference only)