Details

---

BUY MMSZ5265B-V-GS08 https://www.utsource.net/itm/p/8933816.html
MMSZ5265B-V-GS08 Zener Diodes 62V 500mW/0.5W SOD123/1206-62V marking N5

Parameter	Value
Part Number	MMSZ5265B-V-GS08
Type	Zener Diode
Package	SOD-323 (SC-79)
Polarity	Unidirectional
Zener Voltage (Vz)	6.5 V
Tolerance	卤1%
Maximum Power (Pz)	200 mW
Operating Temperature	-65掳C to +150掳C
Reverse Current (Ir)	5 渭A at 6.5 V
Forward Voltage (Vf)	1.2 V at 1 mA
Capacitance	4 pF (at 1 MHz)
Storage Temperature	-65掳C to +150掳C
Lead Finish	Tin (Sn)
RoHS Compliance	Yes

Instructions for Use:

1. Handling Precautions: Handle the diode with care to avoid damage. Use proper ESD protection when handling.
2. Mounting: Ensure the diode is mounted correctly with respect to polarity. The cathode (positive) and anode (negative) should be identified from the markings on the package.
3. Thermal Management: Ensure adequate heat dissipation if operating near the maximum power rating. Consider using a heatsink if necessary.
4. Voltage Regulation: Use the diode for voltage regulation by connecting it in parallel with the load. The reverse bias voltage should be set to the desired Zener voltage.
5. Current Limiting: Use a current-limiting resistor in series with the diode to prevent excessive current flow and potential damage.
6. Storage: Store in a dry, cool place away from direct sunlight and corrosive materials.
7. Soldering: Follow the recommended soldering profile to avoid thermal shock. Preheat the PCB if necessary to reduce thermal stress.
8. Testing: After installation, test the circuit to ensure the diode is functioning correctly. Measure the Zener voltage across the diode under reverse bias conditions.

(For reference only)