Details

---

BUY HZM6.8ZWATL https://www.utsource.net/itm/p/8934543.html
HZM6.8ZWATL 1 pair common cathode Zener Diodes 6.8V 200mW/0.2W SOT23-6.8V marking 68Z low capacitance/protect ESD of signal line

Parameter	Value	Unit
Type	HZM6.8ZWATL	-
Capacitance	6.8	渭F
Voltage Rating	350	VDC
Tolerance	卤20%	%
Ripple Current	1.2	A
Operating Temperature	-40 to +105	掳C
Case Size	16x20	mm
Lead Spacing	19	mm
Insulation Resistance	>1000	M惟
Dielectric Withstand	500	VAC

Instructions:

1. Mounting:

   • Ensure that the capacitor is mounted on a flat surface.
   • Use appropriate mounting hardware to secure the capacitor.

2. Polarity:

   • This is an electrolytic capacitor and must be connected with the correct polarity. The positive lead is typically marked.

3. Voltage:

   • Do not exceed the rated voltage of 350VDC to avoid damage or failure.

4. Temperature:

   • Operate the capacitor within the temperature range of -40掳C to +105掳C to ensure reliable performance.

5. Ripple Current:

   • The maximum ripple current should not exceed 1.2A to prevent overheating and reduce lifespan.

6. Storage:

   • Store in a dry, cool place away from direct sunlight and sources of heat.

7. Handling:

   • Handle with care to avoid mechanical stress which can damage the leads or body of the capacitor.

8. Inspection:

   • Regularly inspect the capacitor for any signs of leakage, swelling, or other physical damage.

9. Disposal:

   • Dispose of the capacitor according to local environmental regulations. Do not incinerate.

(For reference only)