Details

---

BUY YMU787B-CZE7 https://www.utsource.net/itm/p/8941215.html

Parameter	Description	Value
Part Number	Full part number	YMU787B-CZE7
Type	Component type	Crystal Oscillator
Frequency	Operating frequency	26.000 MHz
Tolerance	Frequency tolerance at 25掳C	卤20 ppm
Stability	Temperature stability over operating range	卤30 ppm
Operating Temperature	Operating temperature range	-40掳C to +85掳C
Supply Voltage	Operating voltage range	1.8V to 3.3V
Current Consumption	Typical current consumption	7 mA (max)
Output Type	Output signal type	CMOS
Package	Package type	SMD
Dimensions	Dimensions (L x W x H)	5.0 x 3.2 x 1.2 mm
Mounting	Mounting method	Surface mount
Lead-Free	RoHS compliance	Yes

Instructions for Use

1. Mounting:

   • Ensure the PCB is clean and free from contaminants.
   • Place the YMU787B-CZE7 on the designated footprint with the correct orientation.
   • Apply a small amount of solder paste to the pads.
   • Use a reflow soldering process with a suitable temperature profile to ensure proper bonding.

2. Power Supply:

   • Connect the supply voltage (1.8V to 3.3V) to the Vcc pin and ground to the GND pin.
   • Use decoupling capacitors (typically 0.1 渭F) close to the power pins to filter out noise.

3. Signal Connections:

   • Connect the output signal to the appropriate input of your circuit.
   • Ensure the load capacitance is within the specified range to maintain accuracy.

4. Handling:

   • Handle the component with care to avoid mechanical stress.
   • Use ESD-safe tools and practices to prevent damage from static electricity.

5. Testing:

   • After assembly, verify the frequency output using a frequency counter or oscilloscope.
   • Check for any shorts or open circuits on the PCB.

6. Storage:

   • Store the component in a dry, cool place away from direct sunlight.
   • Use anti-static bags for long-term storage to protect against ESD.

For more detailed information, refer to the datasheet provided by the manufacturer.

(For reference only)