Details

---

BUY S620TG https://www.utsource.net/itm/p/8941668.html

Parameter	Description	Value
Part Number	S620TG
Type	MOSFET
Package	TO-252 (DPAK)
VDS	Drain-Source Voltage	60V
VGS	Gate-Source Voltage	卤20V
ID	Continuous Drain Current	10A (at TJ = 25掳C)
RDS(on)	On-State Resistance (VGS = 10V)	4.5m惟
PTOT	Total Power Dissipation (TA = 25掳C)	2.3W
fSW	Switching Frequency	Up to 500kHz
QG	Gate Charge	18nC
QGD	Gate-Drain Charge	4.5nC
QGS	Gate-Source Charge	5.5nC
td(on)	Turn-On Delay Time	17ns
tr	Rise Time	15ns
td(off)	Turn-Off Delay Time	28ns
tf	Fall Time	22ns
Operating Temperature	Junction Temperature Range	-55掳C to +150掳C
Storage Temperature	Storage Temperature Range	-65掳C to +150掳C

Instructions for Use:

1. Handling and Storage:

   • Store the device in a dry, cool place.
   • Handle with care to avoid damage to the leads and package.

2. Mounting:

   • Ensure proper heat sinking if operating at high power levels.
   • Use a thermal interface material (TIM) between the device and the heat sink for better thermal performance.

3. Electrical Connections:

   • Connect the gate, drain, and source terminals correctly to avoid damage.
   • Use short, low-inductance leads to minimize parasitic inductance.

4. Gate Drive:

   • Apply a gate voltage within the specified range to ensure reliable operation.
   • Use a gate resistor to control the switching speed and reduce electromagnetic interference (EMI).

5. Thermal Management:

   • Monitor the junction temperature to ensure it stays within the operating range.
   • Consider derating the current if operating in high ambient temperatures.

6. Testing:

   • Perform initial testing under controlled conditions to verify correct operation.
   • Use appropriate test equipment to measure parameters such as R_DS(on) and V_DS.

7. Safety:

   • Follow all safety guidelines when handling high-voltage circuits.
   • Ensure proper grounding and isolation to prevent electrical shock.

For more detailed information, refer to the datasheet provided by the manufacturer.

(For reference only)