Details

---

BUY BAV70 SOT-23 https://www.utsource.net/itm/p/8944444.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Forward Voltage	V_F	IF = 5 mA		1.0	1.3	V
Reverse Current	I_R	VR = 100 V, TRR			100	nA
Maximum Reverse Voltage	VR				100	V
Total Power Dissipation	P_T	Ta = 25°C			340	mW
Operating Junction Temperature	T_J		-65		150	°C
Storage Temperature	T_STG		-65		150	°C

Instructions for BAV70 SOT-23:

1. Handling Precautions:

   • Avoid exposing the device to excessive temperatures or mechanical stress.
   • Use appropriate ESD protection measures when handling.

2. Mounting and Soldering:

   • Ensure that the soldering temperature does not exceed 260°C for more than 10 seconds.
   • Allow adequate cooling time after soldering to prevent thermal shock.

3. Electrical Connections:

   • Connect the diode in accordance with the circuit diagram provided in your design.
   • Ensure correct polarity; observe the anode and cathode markings on the package.

4. Power Dissipation Management:

   • Keep power dissipation within specified limits to avoid overheating.
   • Consider heat sinking if operating near maximum power levels.

5. Environmental Considerations:

   • Operate within the specified temperature range to ensure reliable performance.
   • Protect against moisture and corrosive environments.

6. Testing:

   • Perform initial testing under controlled conditions to validate operation parameters.
   • Regularly check for compliance with specified electrical characteristics.

(For reference only)