Details

---

BUY ZMM6V2 ZMM6V2ST LL-34 https://www.utsource.net/itm/p/8944486.html

Parameter	Symbol	Min	Typical	Max	Unit
Reverse Voltage	VR	-	6.0	-	V
Forward Voltage @ 1mA	VF@1mA	-	1.2	-	V
Forward Current (Continuous)	IF(C)	-	20	-	mA
Peak Forward Current (Non-repetitive)	IF(P)	-	100	-	mA
Reverse Leakage Current @ 6V	IR@6V	-	100	-	nA
Operating Temperature	Toper	-40	-	85	掳C
Storage Temperature	Tstg	-65	-	150	掳C

Instructions for Use:

1. Mounting:

   • Ensure the device is mounted on a PCB with proper soldering techniques.
   • Avoid excessive heat during soldering to prevent damage to the component.

2. Handling:

   • Handle the device with care to avoid mechanical stress or damage.
   • Use appropriate ESD (Electrostatic Discharge) protection measures to prevent static damage.

3. Electrical Parameters:

   • Do not exceed the maximum ratings specified in the table.
   • Ensure the forward current does not exceed 20 mA continuously and 100 mA non-repetitively.
   • The reverse voltage should not exceed 6.0 V.

4. Thermal Management:

   • Operate the device within the temperature range of -40掳C to 85掳C.
   • Store the device in an environment between -65掳C and 150掳C.

5. Testing:

   • Test the device under controlled conditions to ensure it meets the specified parameters.
   • Use a multimeter or similar device to measure forward and reverse voltages and currents.

6. Application:

   • This diode is suitable for general-purpose rectification and protection circuits.
   • It can be used in low-voltage and low-current applications where space is a constraint due to its LL-34 package size.

(For reference only)