Details

---

BUY BD6290EFV-E2 https://www.utsource.net/itm/p/8955690.html
IC MTR DRV BIPLR 19-28V 24HTSSOP

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	Operating	4.5	-	36	V
Output Current	IO	Continuous	-	1.2	2.0	A
Quiescent Current	IQ	VIN = 12V, VOUT = 5V	-	2.8	-	mA
Dropout Voltage	VD	IOUT = 1.2A	-	1.0	1.5	V
Thermal Shutdown	TSD	-	-	160	-	°C
Protection	-	Overcurrent, Short-circuit	-	Yes	-	-

Instructions for BD6290EFV-E2:

1. Power Supply Connection:

   • Connect the input voltage (VCC) to a supply within the operating range of 4.5V to 36V.
   • Ensure proper bypassing with a capacitor (typically 10μF) between VCC and GND close to the device.

2. Output Configuration:

   • The output voltage is internally set; no external resistors are required for voltage setting.
   • Use an appropriate output capacitor (e.g., 10μF) to stabilize the output.

3. Thermal Considerations:

   • Ensure adequate heat dissipation if operating at high currents or in high ambient temperatures.
   • The device includes thermal shutdown protection which activates at approximately 160°C.

4. Protection Features:

   • The regulator includes overcurrent and short-circuit protection.
   • In case of a fault, the device will automatically shut down to prevent damage.

5. Layout Recommendations:

   • Keep input and output capacitors as close as possible to the IC to minimize noise and improve stability.
   • Ensure that PCB traces can handle the maximum current without excessive resistance or heating.

6. Operating Environment:

   • Operate within specified temperature and humidity ranges to ensure reliable performance and longevity.

(For reference only)