Details

---

BUY SN65LVDS391PWR https://www.utsource.net/itm/p/8956184.html
IC DRIVER 4/0 16TSSOP

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	VCC	2.7	-	3.6	V	Operating supply voltage range
Output High Level	VOH	-	2.4	3.0	V	Output high level voltage with respect to GND at IOL = -4 mA
Output Low Level	VOL	0.0	0.1	0.4	V	Output low level voltage with respect to GND at IOH = 4 mA
Input Low Level	VIL	0.0	0.8	-	V	Maximum input low level voltage
Input High Level	VIH	2.0	-	VCC	V	Minimum input high level voltage
Propagation Delay	tPD	-	3.5	4.5	ns	Propagation delay time
Skew	tSKEW	-	100	150	ps	Maximum skew between outputs
Power Consumption	ICC	-	10	25	mA	Quiescent supply current

Instructions for SN65LVDS391PWR

1. Power Supply Requirements:

   • Ensure the supply voltage (VCC) is within the specified range of 2.7V to 3.6V.

2. Input Signal Levels:

   • The input signals should meet the specified levels: VIL ≤ 0.8V for a logic low and VIH ≥ 2.0V for a logic high.

3. Output Signal Levels:

   • Outputs will be driven to VOH ≥ 2.4V for a logic high and VOL ≤ 0.4V for a logic low when loaded as specified.

4. Propagation Delay Consideration:

   • Account for the typical propagation delay of 3.5ns in your timing calculations, with a maximum of 4.5ns.

5. Skew Management:

   • Be aware of the maximum skew of 150ps between outputs, which may impact high-speed signal integrity.

6. Power Consumption:

   • Plan for a quiescent supply current up to 25mA under operating conditions.

7. Installation and Handling:

   • Handle the device with care to avoid ESD damage.
   • Follow manufacturer guidelines for PCB layout and decoupling capacitors to ensure optimal performance.

8. Operating Temperature Range:

   • Ensure that the device operates within its specified temperature range for reliable operation. (Note: Specific temperature range not provided in the table, check datasheet for details)

For detailed specifications and additional information, refer to the official Texas Instruments SN65LVDS391PWR datasheet.

(For reference only)