Details

---

BUY L6235D013TR https://www.utsource.net/itm/p/8956863.html
IC MOTOR DRIVER 12V-52V 24SO

Parameter	Description	Value	Unit
Supply Voltage (Vcc)	Operating supply voltage range	8 to 30	V
Output Current (Iout)	Maximum continuous output current per channel	1.3	A
Peak Output Current (Ipeak)	Maximum peak output current per channel	2.0	A
Thermal Shutdown (TSD)	Temperature at which thermal shutdown is activated	160	°C
Operating Temperature (Toper)	Range of operating ambient temperature	-40 to 125	°C
Storage Temperature (Tstg)	Range of storage temperature	-65 to 150	°C
Power Dissipation (Pd)	Maximum power dissipation at 25°C ambient	1.5	W
Short-Circuit Protection	Protection against short-circuit conditions	Yes	-
Overcurrent Protection	Protection against overcurrent conditions	Yes	-
Under-Voltage Lockout (UVLO)	Protection against low supply voltage	Yes	-
Package Type	Type of package	SO-8	-

Instructions for Using the L6235D013TR:

1. Supply Voltage:

   • Ensure the supply voltage (Vcc) is within the range of 8V to 30V.
   • Use appropriate voltage regulators if necessary to maintain this range.

2. Output Current:

   • The maximum continuous output current per channel is 1.3A. Do not exceed this limit to avoid overheating and potential damage.
   • For peak currents, the device can handle up to 2.0A, but ensure these peaks are brief and do not cause excessive heating.

3. Thermal Management:

   • Monitor the device temperature to ensure it does not exceed 160°C, as this will trigger thermal shutdown.
   • Use heatsinks or other cooling methods if operating in high-temperature environments or under heavy load conditions.

4. Operating Temperature:

   • The device is designed to operate in ambient temperatures ranging from -40°C to 125°C. Ensure the operating environment stays within this range.

5. Storage Temperature:

   • Store the device in temperatures between -65°C and 150°C to prevent damage during storage.

6. Power Dissipation:

   • The maximum power dissipation at 25°C ambient is 1.5W. Ensure adequate heat dissipation to avoid exceeding this limit.

7. Protection Features:

   • The device includes short-circuit protection, overcurrent protection, and under-voltage lockout (UVLO). These features help protect the device from common fault conditions.
   • In case of a fault, the device will automatically shut down to prevent damage. Once the fault condition is cleared, the device will resume normal operation.

8. Package Type:

   • The L6235D013TR is housed in an SO-8 package. Follow standard soldering and handling procedures for surface mount devices to ensure reliable assembly.

9. Application Notes:

   • Refer to the datasheet and application notes for detailed information on specific applications, circuit design, and layout recommendations.
   • Ensure proper PCB layout to minimize noise and improve performance, especially in high-frequency or high-power applications.

(For reference only)