Details

---

BUY FODM1008 https://www.utsource.net/itm/p/8973331.html

Parameter	Symbol	Min	Typical	Max	Unit	Notes
Forward Voltage (LED)	VF	-	1.65	2.2	V	@ IF = 20mA
Reverse Voltage	VR	-	-	5	V
Forward Current (Max)	IF	-	-	30	mA	Continuous
Peak Forward Current	IF(Peak)	-	-	100	mA	Pulse Width ≤ 1ms, Duty Cycle ≤ 10%
Reverse Current	IR	-	-	100	nA	@ VR = 5V
Luminous Intensity	Iv	-	200	-	mcd	@ IF = 20mA
Viewing Angle	θ	-	30°	-	°	Half-Intensity Angle
Operating Temperature	TOP	-40	-	85	°C
Storage Temperature	TS	-40	-	100	°C
Lead Soldering Temp.	TL	-	-	260	°C	10s max

Instructions for Use:

1. Mounting:

   • Ensure the leads are bent to fit the PCB layout before soldering.
   • Avoid excessive bending or twisting of the leads to prevent damage.

2. Soldering:

   • Use a temperature-controlled soldering iron set to no more than 260°C.
   • Solder each lead for no longer than 10 seconds to avoid thermal stress.

3. Electrical Connections:

   • Connect the anode (longer lead) to the positive supply.
   • Connect the cathode (shorter lead) to the negative supply or ground.
   • Use a current-limiting resistor to ensure the forward current does not exceed 30mA continuously or 100mA in pulse mode.

4. Handling:

   • Handle with care to avoid mechanical damage.
   • Store in a dry, cool place to prevent moisture damage.

5. Environmental Considerations:

   • The device is RoHS compliant and free from harmful substances.
   • Dispose of the device according to local environmental regulations.

6. Testing:

   • Before final assembly, test the LED using a known good power supply and current-limiting resistor to ensure proper operation.

7. Storage:

   • Store the device in its original packaging until ready for use to protect against static discharge and physical damage.

(For reference only)