Details

---

BUY TLP291(GB-TP,SE https://www.utsource.net/itm/p/8973444.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Forward Voltage	VF	IF = 10 mA		1.2	1.5	V
Peak Forward Surge Current	IFSM	t = 10 ms		30		mA
Reverse Breakdown Voltage	VBR	IR = 5 mA	5			V
Reverse Current	IR	VR = 5 V		10		nA
Storage Temperature	Tstg		-40		110	掳C
Operating Temperature	Topr		-40		85	掳C

Instructions for TLP291 (GB-TP, SE)

1. Handling Precautions:

   • Avoid exposing the device to excessive heat or moisture.
   • Handle with care to prevent physical damage.

2. Mounting and Soldering:

   • Ensure that the soldering temperature does not exceed 260掳C for more than 10 seconds.
   • Allow adequate cooling time after soldering to avoid thermal shock.

3. Electrical Connections:

   • Connect the anode (A) and cathode (K) correctly to avoid reverse polarity damage.
   • Use appropriate current limiting resistors when connecting to power supplies.

4. Environmental Considerations:

   • Operate within the specified temperature range to ensure reliable performance.
   • Protect from environments with high levels of dust, corrosive gases, or other contaminants.

5. Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Follow anti-static precautions to protect against ESD damage.

6. Testing:

   • Before installation, verify the device parameters using a multimeter or similar testing equipment.
   • Perform functional tests under operating conditions to ensure proper performance.

7. Compliance:

   • Ensure compliance with relevant safety and regulatory standards for your application.

(For reference only)