Details

---

BUY LME1212SC https://www.utsource.net/itm/p/8981907.html
Module DC-DC 12VIN 1-OUT 12V 0.021A 0.25W 4-Pin SIP Module Tube

Parameter	Description	Value
Part Number	Part number of the device	LME1212SC
Type	Type of component	Inductor
Package	Package type	SMD (Surface Mount Device)
Mounting	Mounting method	Surface Mount
Inductance	Inductance value	12 渭H
Tolerance	Tolerance of inductance	卤10%
DC Resistance (DCR)	DC resistance at 20掳C	0.03 惟
Rated Current	Maximum continuous current	1.2 A
Saturation Current	Current at which inductance drops by 20%	1.8 A
Operating Temperature	Temperature range for operation	-55掳C to +125掳C
Frequency Range	Frequency range for optimal performance	1 MHz to 100 MHz
Shielding	Magnetic shielding	Shielded
Height	Height of the component	1.2 mm
Length	Length of the component	3.2 mm
Width	Width of the component	2.5 mm

Instructions for Use

1. Soldering:

   • Use a soldering iron with a temperature setting of 350掳C to 400掳C.
   • Apply solder to the pads and the component leads, ensuring a good mechanical and electrical connection.
   • Avoid excessive heat exposure to prevent damage to the component.

2. Storage:

   • Store in a dry, cool place to prevent moisture absorption.
   • Keep away from direct sunlight and sources of high heat.

3. Handling:

   • Handle with care to avoid mechanical stress or damage.
   • Use appropriate ESD (Electrostatic Discharge) protection measures.

4. Mounting:

   • Ensure the PCB (Printed Circuit Board) is clean and free of contaminants.
   • Place the component on the PCB with the correct orientation.
   • Use a reflow soldering process if using automated assembly equipment.

5. Testing:

   • After soldering, inspect the joints for proper alignment and quality.
   • Use a multimeter to check for continuity and resistance values.
   • Verify the inductance value using an LCR meter or similar testing equipment.

6. Application:

   • Suitable for use in power supply circuits, filtering applications, and signal conditioning.
   • Ensure the operating conditions (voltage, current, frequency) are within the specified limits.

7. Safety:

   • Follow all safety guidelines and regulations when handling and using electronic components.
   • Dispose of any damaged or unused components in an environmentally responsible manner.

(For reference only)