Details

---

BUY UCC27512DRST https://www.utsource.net/itm/p/8985731.html
IC GATE DVR LOW SIDE 1CH 6WSON

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Supply Voltage	VDD	4.5	-	18	V
Output High-Level Voltage	VOH	-	90%	-	VDD	IL = 4 A
Output Low-Level Voltage	VOL	-	0.3	0.6	V	IH = -4 A
Input High-Level Voltage	VIH	1.4	-	-	V
Input Low-Level Voltage	VIL	-	-	0.8	V
Propagation Delay	tpd	-	18	35	ns	VDD = 12 V, VI = 5 V, RL = 10 Ω
Rise Time	tr	-	12	25	ns	VDD = 12 V, VI = 5 V, RL = 10 Ω
Fall Time	tf	-	12	25	ns	VDD = 12 V, VI = 5 V, RL = 10 Ω
Operating Temperature	TOP	-40	-	125	°C
Storage Temperature	TSTG	-65	-	150	°C

Instructions for Using UCC27512DRST

1. Supply Voltage (V_DD):

   • Ensure the supply voltage is within the range of 4.5 V to 18 V.
   • Avoid exceeding the maximum voltage to prevent damage to the device.

2. Output Voltage Levels:

   • The output high-level voltage (V_OH) should be at least 90% of the supply voltage when the load current (I_L) is 4 A.
   • The output low-level voltage (V_OL) should not exceed 0.6 V when the load current (I_H) is -4 A.

3. Input Voltage Levels:

   • The input high-level voltage (V_IH) must be at least 1.4 V.
   • The input low-level voltage (V_IL) must not exceed 0.8 V.

4. Timing Parameters:

   • The propagation delay (t_pd) should be between 18 ns and 35 ns under typical conditions.
   • The rise time (t_r) and fall time (t_f) should be between 12 ns and 25 ns under typical conditions.

5. Temperature Considerations:

   • The operating temperature range is from -40°C to 125°C.
   • The storage temperature range is from -65°C to 150°C.

6. Handling and Storage:

   • Store the device in a dry, cool environment to avoid moisture damage.
   • Handle with care to avoid static discharge, which can damage the device.

7. Mounting and PCB Design:

   • Ensure proper thermal management by providing adequate heat dissipation paths on the PCB.
   • Follow recommended PCB layout guidelines to minimize noise and parasitic effects.

8. Testing and Verification:

   • Test the device under specified conditions to ensure it meets the performance parameters.
   • Use appropriate test equipment and methods to verify the functionality and reliability of the device.

(For reference only)