Details

---

BUY K3313 https://www.utsource.net/itm/p/8998333.html

Parameter	Description	Value
Part Number	Identifies the specific component	K3313
Type	Type of device	Crystal Oscillator
Frequency	Operating frequency	16.000 MHz
Load Capacitance	External capacitors required for proper oscillation	12.5 pF
Supply Voltage	Range of supply voltage that can be applied	1.8 to 5.5 V
Output Type	Type of output signal	CMOS
Stability	Frequency stability over temperature and time	±20 ppm
Operating Temp.	Temperature range in which the device can operate reliably	-40°C to +85°C
Package	Physical dimensions and pin configuration	5.0 x 3.2 mm SMD
Mounting Type	Method of attaching to a PCB	Surface Mount

Instructions:

1. Mounting: Ensure the K3313 is mounted on a clean, flat surface of the PCB. Use appropriate soldering techniques for surface mount devices.
2. Power Supply: Connect the power supply within the specified voltage range (1.8 to 5.5 V) to avoid damage to the oscillator.
3. Load Capacitors: Attach external load capacitors of 12.5 pF if not already integrated into the circuit design.
4. Frequency Verification: Verify the operating frequency using an oscilloscope or frequency counter to ensure it matches the specified 16.000 MHz.
5. Operating Environment: Ensure the device operates within the specified temperature range (-40°C to +85°C) to maintain performance and reliability.
6. Storage: Store in a dry environment to prevent moisture damage before installation.

(For reference only)