Details

---

BUY PF7708AS https://www.utsource.net/itm/p/9089351.html

Parameter	Description	Value
Part Number	Device Identifier	PF7708AS
Type	Device Classification	Power Management IC
Function	Primary Function	Buck Converter
Input Voltage	Range of input voltage the device can handle	4.5V to 28V
Output Voltage	Adjustable output voltage range	0.8V to VIN-3
Switching Frequency	Frequency at which the internal switch operates	600kHz
Current Limit	Maximum current the device can deliver	8A
Operating Temperature	Ambient temperature range for operation	-40°C to +85°C
Package	Physical dimensions and pin configuration of the device	SOIC-8

Instructions for Use:

1. Power Supply Connection: Ensure that the input voltage is within the specified range (4.5V to 28V). Connect the input power supply to the VIN pin and ground.

2. Output Configuration: Set the desired output voltage using external resistors connected to the FB (feedback) pin according to the formula provided in the datasheet.

3. Capacitor Selection: Choose appropriate input and output capacitors to ensure stable operation. Refer to the recommended values in the datasheet for optimal performance.

4. Inductor Selection: Select an inductor based on the switching frequency (600kHz) and desired output current. The inductance value should support up to 8A continuous current.

5. Thermal Considerations: Monitor the operating temperature and ensure it stays within the -40°C to +85°C range. Use heat sinks or other cooling methods if necessary.

6. PCB Layout: Follow the layout guidelines provided in the datasheet to minimize noise and improve efficiency. Keep power traces short and wide, and place bypass capacitors close to the device.

7. Testing: After assembly, test the circuit under load conditions to verify correct output voltage and stability. Adjust feedback resistors if necessary to achieve the desired output.

(For reference only)