Details

---

BUY HCPL-7710-500E https://www.utsource.net/itm/p/9225196.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Input Forward Voltage	V_F	IF = 20 mA		1.2	1.6	V
Input Current	I_FT	VF = 1.4V		15	30	mA
CTR (Current Transfer Ratio)	CTR	IF = 20 mA, V_O = 5V	100		300	%
Output Collector-Emitter Saturation Voltage	V_CE(sat)	IC = 10 mA, IF = 20 mA			0.5	V
Output Turn-On Time	t_on	IF = 20 mA, RL = 1 k惟, V_CC = 5V			2	渭s
Output Turn-Off Time	t_off	IF = 20 mA, RL = 1 k惟, V_CC = 5V			2	渭s
Isolation Voltage	VIORM	Safety agency approvals			5000	Vrms
Storage Temperature	T_stg		-40		85	掳C
Operating Temperature	T_op		0		70	掳C

Instructions for HCPL-7710-500E

1. Mounting and Handling:

   • Handle with care to avoid damaging the leads.
   • Ensure proper mounting orientation as indicated on the datasheet.

2. Power Supply Connections:

   • Connect the input side power supply according to the specified forward voltage and current ratings.
   • Connect the output side power supply ensuring it does not exceed the maximum collector-emitter saturation voltage.

3. Signal Input:

   • Apply the input signal within the specified forward current range to ensure reliable operation.
   • Verify that the input current does not exceed the maximum allowable current to prevent damage.

4. Signal Output:

   • Monitor the output turn-on and turn-off times for optimal performance in your application.
   • Ensure the load resistance and supply voltage are within recommended ranges.

5. Isolation Considerations:

   • Respect the isolation voltage rating to maintain safe operation and comply with safety standards.
   • Avoid exceeding the maximum isolation voltage to prevent electrical breakdown.

6. Temperature Management:

   • Operate within the specified storage and operating temperature ranges to ensure longevity and reliability.
   • Implement adequate cooling mechanisms if operating near the upper temperature limit.

7. Safety and Compliance:

   • Ensure compliance with relevant safety regulations and agency approvals when integrating into systems.
   • Review and adhere to any additional guidelines provided by the manufacturer.

(For reference only)