Details

---

BUY IR2153(WHITE) https://www.utsource.net/itm/p/9225518.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	VCC	10	-	20	V	Operating supply voltage range
Gate Drive Output Voltage	VGS	-	15	-	V	Peak-to-peak gate drive output voltage
Quiescent Current	IQ	-	1.5	-	mA	Supply current with no load
Maximum Output Current	IOUT	-	4	-	A	Peak output current per channel
Propagation Delay	td	-	65	-	ns	Time delay between input and output
Operating Temperature	TOP	-40	-	125	°C	Operating temperature range
Storage Temperature	TSTG	-65	-	150	°C	Storage temperature range
Input Capacitance	CIN	-	20	-	pF	Input capacitance at VCC = 15V
Output Capacitance	COUT	-	10	-	pF	Output capacitance at VCC = 15V
Shutdown Mode Current	ISD	-	0.1	-	μA	Supply current in shutdown mode

Instructions for Using the IR2153(WHITE):

1. Supply Voltage (V_CC):

   • Ensure the supply voltage is within the range of 10V to 20V to avoid damage to the device.

2. Gate Drive Output Voltage (V_GS):

   • The peak-to-peak gate drive output voltage is typically 15V. This should be sufficient to fully turn on the MOSFETs being driven.

3. Quiescent Current (I_Q):

   • The quiescent current is typically 1.5mA. This is the current drawn by the device when it is not driving any load.

4. Maximum Output Current (I_OUT):

   • The peak output current per channel is 4A. Ensure that the load does not exceed this limit to prevent damage.

5. Propagation Delay (t_d):

   • The propagation delay is typically 65ns. This is the time delay between the input signal and the output response.

6. Operating Temperature (T_OP):

   • The device can operate within a temperature range of -40°C to 125°C. Ensure that the operating environment does not exceed these limits.

7. Storage Temperature (T_STG):

   • The storage temperature range is -65°C to 150°C. Store the device in a suitable environment to avoid damage.

8. Input Capacitance (C_IN):

   • The input capacitance is typically 20pF at V_CC = 15V. This value is important for designing the input circuitry.

9. Output Capacitance (C_OUT):

   • The output capacitance is typically 10pF at V_CC = 15V. This value is important for designing the output circuitry.

10. Shutdown Mode Current (I_SD):

    • In shutdown mode, the supply current is reduced to 0.1μA. Use the shutdown pin to reduce power consumption when the device is not in use.

Additional Notes:

• Always refer to the datasheet for detailed information and specific application notes.
• Ensure proper heat dissipation if the device is operating at high temperatures or under heavy loads.
• Use appropriate decoupling capacitors near the power supply pins to minimize noise and ensure stable operation.

(For reference only)