Details

---

BUY ISA10N65A https://www.utsource.net/itm/p/9226250.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Input Voltage	VIN		4.5		18	V
Output Voltage	VOUT			5		V
Output Current	IOUT	Continuous		1.2		A
Quiescent Current	IQ	No load		0.06		mA
Dropout Voltage	VDROPOUT	IOUT = 1.2A		0.6		V
Ripple Rejection	RR	f = 120Hz		70		dB
Operating Temperature	TOPR	Storage	-40		85	°C
Junction Temperature	Tj	Maximum			125	°C

Instructions for ISA10N65A:

1. Power Supply Connection:

   • Connect the input voltage (VIN) to the supply source within the specified range of 4.5V to 18V.
   • Ensure the output voltage (VOUT) is set to the desired level, typically 5V.

2. Output Load:

   • The device can provide up to 1.2A continuously. Ensure that the load does not exceed this limit to avoid overheating or damage.

3. Thermal Considerations:

   • Operate within the temperature range of -40°C to 85°C for optimal performance and reliability.
   • Keep the junction temperature below 125°C to prevent thermal shutdown or damage.

4. Noise Suppression:

   • For effective noise suppression, place a capacitor close to the input and output terminals. A typical value is 10μF for each.

5. Installation:

   • Mount the device on a suitable heatsink if operating near the maximum current or in high ambient temperatures.

6. Storage:

   • Store in a dry environment within the temperature range specified for storage.

7. Handling Precautions:

   • Handle with care to avoid electrostatic discharge (ESD). Use appropriate ESD protection measures when handling the component.

(For reference only)