Details

---

BUY HCPL0600R2 SOP8 https://www.utsource.net/itm/p/9226279.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Input Current	I(F)	VDD = 5V, IF = 20mA	0.1	0.3	0.5	mA
Output High Voltage	VOH	IO = -4mA	2.4	2.7	3.6	V
Output Low Voltage	VOL	IO = 8mA	0	0.4	0.8	V
Propagation Delay Time	tPLH,tPHL	VDD = 5V, IF = 20mA, IO = 卤8mA	0.2	0.6	1.5	渭s
Power Supply Rejection Ratio	PSRR	f = 1kHz	-	70	-	dB
Operating Temperature	Topr	-	-40	-	85	掳C
Storage Temperature	Tstg	-	-65	-	150	掳C

Instructions for HCPL0600R2 SOP8

1. Power Supply Requirements:

   • Ensure the power supply voltage (VDD) is within the specified range of 4.75V to 5.25V for reliable operation.

2. Input Signal:

   • Apply an input current (IF) between 0.1mA and 0.5mA for proper switching. The typical operating current is 0.3mA.

3. Output Load:

   • Connect a load that ensures the output current (IO) does not exceed the maximum ratings provided in the table. For high output, ensure IO does not exceed -4mA; for low output, ensure IO does not exceed 8mA.

4. Propagation Delay:

   • Account for a propagation delay between 0.2渭s and 1.5渭s when designing timing circuits. This delay can affect the overall response time of your system.

5. Operating Environment:

   • Operate the device within the temperature range of -40掳C to 85掳C. Ensure adequate thermal management if operating near the upper limit.

6. Storage Conditions:

   • Store the device in environments where temperatures do not exceed -65掳C to 150掳C to maintain component integrity.

7. Electrostatic Discharge (ESD) Precautions:

   • Handle with care as the device is sensitive to ESD. Use appropriate ESD protection measures during handling and installation.

8. Mounting Orientation:

   • Follow recommended mounting guidelines to ensure proper heat dissipation and mechanical stability.

9. Signal Integrity:

   • Keep signal traces short and direct to minimize noise and interference, especially for high-speed applications.

10. Testing and Validation:

    • Perform thorough testing under all expected operating conditions to validate performance and reliability.

(For reference only)